PassLeader just published the NEWEST Fortinet NSE8_812 exam dumps! And, PassLeader offer two types of the NSE8_812 dumps — NSE8_812 VCE dumps and NSE8_812 PDF dumps, both VCE and PDF contain the NEWEST NSE8_812 exam questions, they will help you PASSING the Fortinet NSE8_812 exam easily! Now, get the NEWEST NSE8_812 dumps in VCE and PDF from PassLeader — https://www.passleader.com/nse8-812.html (235 Q&As Dumps)
What’s more, part of that PassLeader NSE8_812 dumps now are free — https://drive.google.com/drive/folders/1cDWnIf_DJEFgVEbiodH_-L_uXDSQ73sa
NEW QUESTION 211
A customer has FortiAP devices in three branch offices managed from a FortiGate in the HQ. Each FortiAP is connected to a dedicated management VLAN. The customer wants the users connected to the FortiAP SSIDs to use the branch local internet connection, but each branch uses a different VLAN ID for the bridge. HQ users travel to different branches and connect to the same SSID. Which configuration option will solve this requirement?
A. Set each FortiAP to a wtp-group and use set vlan-pooling wtp-group on the VAP configuration with the corresponding VLAN ID configuration for each group.
B. Set a FortiAuthenticator for 802.1x authentication with the Tunnel-Type attribute set to VLAN and use set dynamic-vlan enable on the VAP configuration.
C. Use set vlan-pooling round-robin on the VAP configuration with the corresponding vlan-pool.
D. Use set vlan-pooling hash on the VAP configuration with the corresponding vlan-pool.
Answer: B
NEW QUESTION 212
You are performing a packet capture on a FortiGate 2600F with the hyperscale licensing installed. You need to display on screen all egress/ingress packets from the port16 interface that have been offloaded to the NP7.
Which three commands need to be run? (Choose three.)
A. diagnose npu sniffer filter intf port16
B. diagnose npu sniffer filter selector 0
C. diagnose sniffer packet npudbg
D. diagnose npu sniffer filter dir 2
E. diagnose sniffer packet port16
Answer: ACD
NEW QUESTION 213
You deployed a fully loaded FG-7121F in the data center and enabled sslvpn-load-balance. Based on the behavior of this feature which statement is correct?
A. You can use src-ip or dst-ip-dport on dp-load-distribution-method to make SSL VPN load balancing work as expected.
B. If an FPM goes down, SSL VPN IP pool IP addresses will be re-allocated to the remaining FPMs.
C. To have better traffic distribution you should use IP pools that increment in multiples of 12.
D. Enabling SSL VPN load balancing will clear the session table.
Answer: A
NEW QUESTION 214
A customer is operating a FortiWeb cluster in a high volume active-active HA group consisting of eight FortiWeb appliances. One of the secondary members is handling traffic for one specific VIP. What will happen with the traffic if that secondary FortiWeb appliance fails?
A. Traffic will be redirected to the next appliance in the same traffic group.
B. Traffic will be redistributed by the primary appliance to the remaining secondary appliances.
C. Traffic will be redistributed by the primary appliance to the remaining secondary appliances that are configured to handle traffic for that specific VIP.
D. Traffic will be redirected to the secondary member with the least number of sessions.
Answer: A
NEW QUESTION 215
An administrator discovers that CPU utilization of a FortiGate-200F is high and determines that no traffic is being accelerated by hardware. Why is no traffic being accelerated by hardware?
A. Oper-session-accounting is enabled under np6xlite config.
B. strict-dirty-session-check is enabled in global config.
C. check-protocol-header is set to strict in the global config.
D. delay-tcp-npu-session is enabled under the firewall policy.
Answer: C
NEW QUESTION 216
A customer would like to improve the performance of a FortiGate VM running in an Azure D4s_v3 instance, but they already purchased a BYOL VM04 license. Which two actions will improve performance the most without making a FortiGate license change? (Choose two.)
A. Migrate the FortiGate to an Azure F4s_v2.
B. Enable “Accelerated networking” on the Azure network interfaces.
C. Enable SR-IOV on the FortiGate.
D. Migrate the FortiGate to an Azure D8s_v3.
Answer: AB
NEW QUESTION 217
Which two statements about bounce address tagging and verification (BATV) on FortiMail are true? (Choose two.)
A. You must publish the BATV public key as a DNS TXT record.
B. Emails with an empty sender address will be subjected to bounce verification.
C. FortiMail will insert the BATV tag to the sender address in the envelope.
D. BATV will use symmetric keys to verify the bounce address tag.
Answer: BC
NEW QUESTION 218
A FortiGate running FortiOS 7.2.0 GA is configured in multi-vdom mode with a vdom set to vdom type Admin and another vdom set to vdom type Traffic. Which two GUI sections are available on both VDOM types? (Choose two.)
A. Interface configuration.
B. Packet capture.
C. Security Fabric topology and external connectors.
D. Certificates.
E. FortiClient configuration.
Answer: AB
NEW QUESTION 219
A FortiGate is configured to perform outbound firewall authentication with Azure AD as a SAML IdP. What are two valid interactions that occur when the client attempts to access the internet? (Choose two.)
A. FortiGate SP sends a SAML request to the IdP.
B. The Microsoft SAML IdP sends the SAML response to the FortiGate SP.
C. The client browser forwards the SAML response received from Microsoft SAML IdP to the FortiGate SP.
D. FortiGate SP redirects the client browser to the local captive portal and then redirects to the Microsoft SAML IdP.
Answer: AB
NEW QUESTION 220
Refer to the exhibit showing a FortiEDR configuration:
Based on the exhibit, which statement is correct?
A. The presence of a cryptolocker malware at rest on the filesystem will be detected by the Ransomware Prevention security policy.
B. FortiEDR Collector will not collect OS Metadata.
C. If a malicious file is executed and attempts to establish a connection it will generate duplicate events.
D. If an unresolved file rule is triggered, by default the file is logged but not blocked.
Answer: D
NEW QUESTION 221
Refer to the exhibit:
An HTTPS access proxy is configured to demonstrate its function as a reverse proxy on behalf of the web server it is protecting. It verifies user identity, device identity, and trust context, before granting access to the protected source. It is assumed that the FortiGate EMS fabric connector has already been successfully connected. You need to ensure that ZTNA access through the FortiGate will redirect users to the FortiAuthenticator to perform username/password and multifactor authentication to validate access prior to accessing resources behind the FortiGate. In this scenario, which two further steps need to be taken on the FortiGate? (Choose two.)
A. Create a SAML user/server object referring to the FortiAuthenticator.
B. Create an authentication rule that sets the sso-auth-method to the FortiAuthenticator.
C. Create an authentication scheme with the “method” as SAML.
D. Create a firewall rule that allows access from the remote endpoint to the resources behind the FortiGate.
Answer: AC
NEW QUESTION 222
Refer to the exhibit:
The exhibit shows the topology a customer wants to implement using a flexible authentication scheme. Users connecting from trusted remote locations are authenticated using only their username/password when connecting to the SSLVPN FortiGate in the data center. When connecting from the Untrusted Clients, users must authenticate using 2-factor authentication. In this scenario, which RADIUS attribute can be used as a RADIUS policy selector on the FortiAuthenticator to accomplish this goal?
A. Calling-Station-Id
B. Framed-IP-Address
C. Tunnel-Client-Auth-Id
D. Login-IP-Host
Answer: C
NEW QUESTION 223
Refer to The exhibit, which shows a topology diagram:
A customer wants to use SD-WAN for traffic generated from the data center towards Branches. SD-WAN on HUB should follow the underlay condition on each Branch and the solution should be scalable for hundreds of Branches. Which SD-WAN-Rules strategy should be used?
A. Manual based on route-tags.
B. Lowest Cost SLA.
C. Auto based on link quality.
D. Best Quality based on route-tags.
Answer: D
NEW QUESTION 224
Refer to the exhibit, which shows an SD-WAN configuration:
You configured the SD-WAN from Branch1 to the HUB and enabled packet duplication. You later notice that the traffic is not being duplicated. In this scenario, what is causing this problem?
A. There is a mismatch in the FortiOS version between Branch1 and HUB.
B. Traffic cannot be duplicated over multiple zones.
C. Packet duplication is not enabled on the HUB side.
D. Packet duplication did not occur because an interface is out of SLA.
Answer: B
NEW QUESTION 225
Refer to the exhibit:
What is happening in this scenario?
A. The user status changed at FortiClient EMS to off-net.
B. The user is authenticating against a FortiGate Captive Portal.
C. The user is authenticating against an IdP.
D. The user has not authenticated on their external browser.
Answer: C
NEW QUESTION 226
Refer to the exhibit:
A customer is trying to setup a Playbook automation using a FortiAnalyzer, FortiWeb and FortiGate. The intention is to have the FortiGate quarantine any source of SQL Injection detected by the FortiWeb. They got the automation stitch to trigger on the FortiGate when simulating an attack to their website, but the quarantine object was created with the IP 0.0.0.0. Referring to the configuration and logs in the exhibits, which two statements are true? (Choose two.)
A. The Group By option in the handler should be different to src, so src can be used on the Playbook configuration.
B. FortiSOC Playbooks combining FortiWeb and FortiGate are not supported.
C. To diagnose this issue, you need to use the command diagnose test application oftpd 22.
D. The FortiAnalyzer ADOM Type must be Fabric.
E. To fix the issue the parameter for script on the Playbook configuration should be epip.
Answer: AD
NEW QUESTION 227
Refer to the exhibit:
The Company Corp administrator has enabled Workflow mode in FortiManager and has assigned approval roles to the current administrators. However, workflow approval does not function as expected. The CTO is currently unable to approve submitted changes. Given the exhibit, which two possible solutions will resolve the workflow approval problems with the Workflow_72 ADOM? (Choose two.)
A. The CTO must have a defined email address for their admin user account.
B. The CTO and CISO need to swap Approval Groups so that the highest authority is in Group #1.
C. The CTO must have Standard access level or higher for FortiManager.
D. The CISO must have a higher access level than “Read_Only_User” in FortiManager.
E. The CTO needs to be added to “Email Notification” in the Workflow_72 ADOM.
Answer: AC
NEW QUESTION 228
……
Learning the PassLeader NSE8_812 dumps with VCE and PDF for 100% passing Fortinet certification — https://www.passleader.com/nse8-812.html (235 Q&As Dumps)
BONUS!!! Download part of PassLeader NSE8_812 dumps for free — https://drive.google.com/drive/folders/1cDWnIf_DJEFgVEbiodH_-L_uXDSQ73sa