PassLeader just published the NEWEST Fortinet FCP_FMG_AD-7.6 exam dumps! And, PassLeader offer two types of the FCP_FMG_AD-7.6 dumps — FCP_FMG_AD-7.6 VCE dumps and FCP_FMG_AD-7.6 PDF dumps, both VCE and PDF contain the NEWEST FCP_FMG_AD-7.6 exam questions, they will help you PASSING the Fortinet FCP_FMG_AD-7.6 exam easily! Now, get the NEWEST FCP_FMG_AD-7.6 dumps in VCE and PDF from PassLeader — https://www.passleader.com/fcp-fmg-ad-7-6.html (45 Q&As Dumps)
What’s more, part of that PassLeader FCP_FMG_AD-7.6 dumps now are free — https://drive.google.com/drive/folders/1mYWI25v00pN0s1kVTlpnmt7X9xeWV8Je
NEW QUESTION 1
What is the best explanation of how FortiManager helps with mass provisioning?
A. It upgrades the OS of each FortiGate device.
B. It provides local FortiGuard Distribution Server (FDS) services to the network.
C. It uses templates to configure the same settings on many devices simultaneously.
D. It sends email alerts when new devices connect.
Answer: C
Explanation:
FortiManager helps with mass provisioning by using templates that allow administrators to configure the same settings on multiple FortiGate devices simultaneously, streamlining deployment and management.
NEW QUESTION 2
What is the purpose of ADOM revisions?
A. ADOM revisions find unused, duplicate, and unnecessary firewall policies and objects.
B. ADOM revisions show specific changes in a policy package when it is installed.
C. ADOM revisions compare previous snapshots of the Policy Package and ADOM-level objects with the device-level database.
D. ADOM revisions save the current state of all policy packages and objects for an ADOM.
Answer: D
Explanation:
ADOM revisions save the current state of all policy packages and objects within an ADOM, allowing administrators to track changes over time and revert to previous configurations if needed.
NEW QUESTION 3
Push updates are failing on a FortiGate device located behind a network address translation (NAT) device. Which two settings should the administrator check to correct this problem? (Choose two.)
A. Make sure the NAT device IP address and the correct ports are configured on FortiManager.
B. Make sure FortiGuard updates and web service are enabled on the FortiGuard service interface.
C. Make sure the virtual IP address and the correct ports are configured on the NAT device.
D. Make sure the Bind to IP address option on the FortiGuard service interface is set to the virtual IP address from the NAT device.
Answer: AC
Explanation:
FortiManager must have the NAT device’s IP address and correct ports configured to communicate properly with the FortiGate behind NAT. The NAT device must have the correct virtual IP address and ports configured to allow push updates to reach the FortiGate device.
NEW QUESTION 4
The administrator uses FortiManager to push a CLI script using the Remote FortiGate Directly (via CLI) option to configure an IPsec VPN. However, when running the script, the administrator receives the following error:
config vpn ipsec phase2-interface [parameter(s) invalid. detail: object mismatch]
What must the administrator do to resolve the script error and successfully apply the IPsec configuration?
A. Add the end command after finishing the IPsec phase 1-interface configuration block.
B. Use IPsec templates to deploy provisioning templates.
C. Add a second config vpn ipsec phase2-interface block without linking it to phase1.
D. Run the script using the policy package or ADOM database method.
Answer: D
Explanation:
Running the script through the policy package or ADOM database method allows FortiManager to properly interpret object relationships and dependencies in the IPsec configuration, preventing object mismatch errors when pushing complex VPN settings directly via CLI.
NEW QUESTION 5
An administrator has a FortiGate-HQ device with VDOMs-root, HR and Facilities, currently managed under the FortiManager ADOM-Site1. They try to move VDOM HR to the FortiManager ADOM-Site2, but it does not work. Why is the administrator not able to move FortiGate-HQ VDOM HR to FortiManager ADOM-Site2?
A. The FortiGate-HQ must be managed under the FortiManager ADOM-root to allow moving its VDOMs to different ADOMs.
B. The administrator must have full access in the device layer of FortiGate-HQ VDOM-root before they can VDOMs to different ADOMs.
C. FortiManager must be in ADOM normal mode, which does not allow VDOMs to be managed separately.
D. The administrator must delete the FortiGate-HQ device from FortiManager and add it again using the Add Device wizard before moving the VDOM.
Answer: A
Explanation:
FortiGate devices must be managed under the FortiManager ADOM corresponding to the root VDOM to allow their individual VDOMs to be moved and managed in different ADOMs. Managing the root VDOM in a different ADOM prevents moving subordinate VDOMs across ADOMs.
NEW QUESTION 6
You want to let multiple administrators work in the same ADOM without creating configuration conflicts. What is the best and the most effective solution to apply?
A. Configure RADIUS authentication to assign ADOM roles to each user.
B. Enable workflow mode, which is the only way to prevent concurrent configuration conflicts.
C. Assign administrators with JSON API access to the FortiManager.
D. Activate workspace mode in the ADOM settings.
Answer: D
Explanation:
Activating workspace mode in the ADOM settings allows multiple administrators to work concurrently in the same ADOM by isolating their configuration changes in separate workspaces, preventing conflicts and enabling effective collaboration.
NEW QUESTION 7
An administrator wants to configure and manage multiple objects in the FortiManager database and give access to other users who work in the same database. To stay in control of the changes made to firewall policies by other team members, the administrator needs a setup where all modifications go through a central check before they can be installed. How can the administrator create this setup?
A. Enable the prompt asking the administrator to accept firewall policies changes before saving.
B. Enable the workspace (for all ADOMs) to control all changes made by any administrator.
C. Enable device lock and the advanced mode feature in the ADOM.
D. Enable workflow mode and the ADOM lock feature.
Answer: D
Explanation:
Enabling workflow mode along with the ADOM lock feature ensures that all configuration changes go through a centralized review and approval process before installation, allowing controlled and coordinated management of firewall policies by multiple administrators.
NEW QUESTION 8
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)
A. When FortiManager installs device-level changes on a managed device.
B. When changes to the device-level database are made on FortiManager.
C. When FortiManager is auto-updated with configuration changes made directly on a managed device.
D. When a provisioning template is assigned to a managed device on the device-level database.
Answer: BC
Explanation:
FortiManager creates a new revision history entry whenever changes are made to the device-level database on FortiManager. FortiManager also creates a new revision when it auto-updates its database with configuration changes detected directly on a managed device.
NEW QUESTION 9
An administrator has assigned a global policy package to a new ADOM named ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?
A. The administrator will be able to select the option to assign the global policy package to the new policy package.
B. FortiManager will automatically assign the global policy package to the new policy package.
C. FortiManager will automatically install policies on the policy package in ADOM1.
D. The administrator will have to assign the global policy package from the global ADOM.
Answer: A
Explanation:
When a global policy package is assigned to an ADOM, administrators creating new policy packages within that ADOM have the option to select and assign the global policy package to the new policy package if desired.
NEW QUESTION 10
Which is recommended when you are managing a high volume of logs in your network?
A. Store logs on FortiManager and use FortiView.
B. Add and manage FortiAnalyzer from FortiManager.
C. Enable advanced ADOM mode on FortiManager.
D. Forward logs from FortiAnalyzer to FortiManager daily.
Answer: B
Explanation:
Adding and managing FortiAnalyzer from FortiManager is recommended for handling a high volume of logs, as FortiAnalyzer is designed specifically for centralized log management, analysis, and reporting, which offloads this workload from FortiManager.
NEW QUESTION 11
An administrator configures a new BGP peer in the FortiManager device-level database of FortiGate. They reinstall the policy package to the managed FortiGate device without any errors. However, when the administrator logs in to FortiGate, they do not see the BGP configuration changes. What is the most likely reason why FortiManager did not push the BGP peer changes to FortiGate?
A. The administrator must run a sanity check on FortiManager to make sure the database is not corrupted.
B. Fortigate has a BGP template assigned on the FortiManager database.
C. The administrator must use the Install Wizard and select Install device settings only to push BGP settings.
D. The FortiGate firmware version is different from the FortiManager ADOM version.
Answer: B
Explanation:
If a BGP template is assigned to the FortiGate device on FortiManager, device-level BGP configurations made directly in the device-level database are overridden by the template settings, so the changes do not get pushed to the device.
NEW QUESTION 12
Company policy dictates that any time a change is made to a policy package on FortiManager an ADOM revision is created before the change installed, and that revision is held for a minimum of 90 days. Over the past three months, each installed change has resulted in several unused policies and duplicate objects. The FortiManager administrator plans to upgrade the FortiGate devices and then upgrade the FortiManager ADOM from version 7.4 to 7.6. Which action can the administrator take to avoid slow ADOM upgrades?
A. Check and repair the global configuration database before upgrading.
B. Export firewall policies to Excel, delete them on the ADOM. then reimport them after upgrading the ADOM.
C. Find unused firmware templates, then delete them before upgrading.
D. Limit ADOM revisions before upgrading.
Answer: D
Explanation:
Limiting ADOM revisions reduces the number of stored historical configurations, which helps avoid performance degradation and slow ADOM upgrades caused by a large volume of revisions.
NEW QUESTION 13
An administrator must create a policy and install it on a FortiGate device within an ADOM in backup mode. How can the administrator perform this task?
A. Use the Install Wizard located on the device manager.
B. Enable workflow mode to allow policy creation and approval.
C. Make sure the ADOM and FortiGate firmware versions match and use the ADOM policy package.
D. Use a FortiManager script to apply the configuration changes.
Answer: D
Explanation:
In backup mode, FortiManager does not directly manage policy installation via the usual ADOM policy packages; instead, administrators use FortiManager scripts to push configuration changes, including policies, to FortiGate devices.
NEW QUESTION 14
After correcting a policy package configuration issue, you want to prevent administrators from repeating the mistake that caused the issue. Which FortiManager approach best meets this need?
A. Configure an TCL script to run locally on FortiManager for each FortiGate.
B. Restrict administrators with an administration profile from viewing the revision history to limit who can make changes.
C. Enable the change note to require administrators to add a note whenever they change object configurations.
D. Enable a workflow requiring approval before installing policy packages on any FortiGate.
Answer: D
Explanation:
Enabling a workflow with approval ensures that any policy package changes must be reviewed and approved before installation, preventing administrators from repeating configuration mistakes and enforcing change control.
NEW QUESTION 15
A service provider administrator has assigned a global policy package to a managed customer ADOM named My_ADOM. The customer administrator has access only to My_ADOM. How can the customer administrator edit the global header policy of the global policy package?
A. The customer administrator can edit the header policy by using workspace mode on the global ADOM.
B. The customer administrator can edit the header policy by using workflow mode on the global ADOM and My_ADOM.
C. The service provider administrator can unlock the global policy from the global ADOM to authorize changes to the customer administrator.
D. The customer administrator cannot edit the global header policy; only the service provider administrator can make changes from the global ADOM.
Answer: D
Explanation:
The global policy package is managed only from the global ADOM by the service provider administrator. Customer administrators with access solely to their ADOM (My_ADOM) cannot edit the global header policy; such changes must be made by the service provider administrator in the global ADOM.
NEW QUESTION 16
An administrator is copying a system template profile between ADOMs by running the following command:
execute fmprofile export-profile ADOM 3547 /tmp/Backup_File output dump to file: [/tmp/Backup_File]
Where does this command export the system template profile from?
A. FortiManager /tmp/Backup_File folder.
B. FortiManager ADOM policy database.
C. ADOM device database.
D. FortiManager configuration backup file.
Answer: B
Explanation:
The command exports the system template profile from the FortiManager ADOM policy database, which stores the configuration templates for devices within that ADOM.
NEW QUESTION 17
……
Learning the PassLeader FCP_FMG_AD-7.6 dumps with VCE and PDF for 100% passing Fortinet certification — https://www.passleader.com/fcp-fmg-ad-7-6.html (45 Q&As Dumps)
BONUS!!! Download part of PassLeader FCP_FMG_AD-7.6 dumps for free — https://drive.google.com/drive/folders/1mYWI25v00pN0s1kVTlpnmt7X9xeWV8Je