PassLeader just published the NEWEST Fortinet FCSS_CDS_AR-7.6 exam dumps! And, PassLeader offer two types of the FCSS_CDS_AR-7.6 dumps — FCSS_CDS_AR-7.6 VCE dumps and FCSS_CDS_AR-7.6 PDF dumps, both VCE and PDF contain the NEWEST FCSS_CDS_AR-7.6 exam questions, they will help you PASSING the Fortinet FCSS_CDS_AR-7.6 exam easily! Now, get the NEWEST FCSS_CDS_AR-7.6 dumps in VCE and PDF from PassLeader — https://www.passleader.com/fcss-cds-ar-7-6.html (38 Q&As Dumps)
What’s more, part of that PassLeader FCSS_CDS_AR-7.6 dumps now are free — https://drive.google.com/drive/folders/1RUtXh2QEy7YNtJ2nx9FT1x0-nawtdAvn
NEW QUESTION 1
In an SD-WAN TGW Connect topology, which three initial steps are mandatory when routing traffic from a spoke VPC to a security VPC through a Transit Gateway? (Choose three.)
A. From the security VPC TGW subnet routing table, point 0.0.0.0/0 traffic to the FortiGate internal port.
B. From the security VPC TGW subnet routing table, point 0.0.0.0/0 traffic to the TGW.
C. From both spoke VPCs and the security VPC, point 0.0.0.0/0 traffic to the Internet Gateway.
D. From the security VPC FortiGate internal subnet routing table, point 0.0.0.0/0 traffic to the TGW.
E. From the spoke VPC internal routing table, point 0.0.0.0/0 traffic to the TGW.
Answer: ADE
NEW QUESTION 2
An AWS administrator must ensure that each member of the cloud deployment team has the correct permissions to deploy and manage resources using CloudFormation. The administrator is researching which tasks must be executed with CloudFormation and therefore require CloudFormation permissions. Which task is run using CloudFormation?
A. Deploying a new pod with a service in an Elastic Kubernetes Service (EKS) cluster using the kubectl command.
B. Installing a Helm chart to deploy a FortiWeb ingress controller in an EKS cluster.
C. Creating an EKS cluster with the eksctl create cluster command.
D. Changing the number of nodes in an EKS cluster from AWS CloudShell.
Answer: D
NEW QUESTION 3
An administrator decides to use the Use managed identity option on the FortiGate SDN connector with Microsoft Azure. However, the SDN connector is failing on the connection. What must the administrator do to correct this issue?
A. Make sure to add the Client Secret on the FortiGate side of the configuration.
B. Make sure to add the Tenant ID on the FortiGate side of the configuration.
C. Make sure to enable the system-assigned managed identity on Azure.
D. Make sure to set the type to system managed identity on FortiGate SDN connector settings.
Answer: C
NEW QUESTION 4
An administrator is configuring a software-defined network (SDN) connector in FortiWeb to dynamically obtain information about existing objects in an Amazon Elastic Kubernetes Service (EKS) cluster. Which AWS policy should the administrator attach to a user to achieve this goal?
A. AmazonEKSConnectorServiceRolePolicy
B. AmazonEKSComputePolicy
C. AmazonEKSServicePolicy
D. AmazonEKSClusterPolicy
Answer: D
NEW QUESTION 5
Which statement about Transit Gateway (TGW) in Amazon Web Services (AWS) is true?
A. Both the TGW attachment and propagation must be in the same TGW route table.
B. TGW can have multiple TGW route tables.
C. A TGW attachment can be associated with multiple TGW route tables.
D. The TGW default route table cannot be disabled.
Answer: B
NEW QUESTION 6
An administrator is trying to implement FortiCNP with Microsoft Azure Security integration. However, FortiCNP is not able to extract any cloud integration data from Azure; therefore, real-time cloud security monitoring is not possible. What is causing this issue?
A. The organization is using a free Azure AD license.
B. The Azure account doesn’t have the Global Administrator role.
C. The administrator enabled the wrong Defender plan for servers.
D. The FortiCNP account in Azure has the Storage Blob Data Reader role.
Answer: D
NEW QUESTION 7
Your monitoring team reports performance issues with a web application hosted in Azure. You suspect that the bottleneck might be due to unexpected inbound traffic spikes. Which method should you use to identify and analyze the traffic pattern?
A. Deploy Azure Firewall to log traffic by IP address.
B. Enable Azure DDoS protection to prevent inbound traffic spikes.
C. Use Azure Traffic Manager to visualize all traffic to the application.
D. Enable NSG Flow Logs and analyze logs with Azure Monitor.
Answer: D
NEW QUESTION 8
The cloud administration team is reviewing an AWS deployment that was done using CloudFormation. The deployment includes six FortiGate instances that required custom configuration changes after being deployed. The team notices that unwanted traffic is reaching some of the FortiGate instances because the template is missing a security group. To resolve this issue, the team decides to update the JSON template with the missing security group and then apply the updated template directly, without using a change set. What is the result of following this approach?
A. If new FortiGate instances are deployed later, they will include the updated changes.
B. Some of the FortiGate instances may be deleted and replaced with new copies.
C. The update is applied, and the security group is added to all instances without interruption.
D. CloudFormation rejects the update and warns that a new full stack is required.
Answer: B
NEW QUESTION 9
An administrator would like to use FortiCNP to keep track of sensitive data files located in the Amazon Web Services (AWS) S3 bucket and protect it from malware. Which FortiCNP feature should the administrator use?
A. FortiCNP Threat Detection policies.
B. FortiCNP Risk Management policies.
C. FortiCNP Data Scan policies.
D. FortiCNP Compliance policies.
Answer: C
NEW QUESTION 10
You are using Ansible to modify the configuration of several FortiGate VMs. What is the minimum number of files you need to create, and in which file should you configure the target FortiGate IP addresses?
A. One playbook file for each target and the required tasks, and one inventory file.
B. One .yaml file with the target IP addresses, and one playbook file with the tasks.
C. One inventory file for each target device, and one playbook file.
D. One text file for all target devices, and one playbook file.
Answer: B
NEW QUESTION 11
Your DevOps team is evaluating different Infrastructure as Code (IaC) solutions for deploying complex Azure environments. What is an advantage of choosing Azure Bicep over other IaC tools available?
A. Azure Bicep generates deployment logs that are optimized to improve error handling.
B. Azure Bicep provides immediate support for all Azure services, including those in preview.
C. Azure Bicep requires less frequent schema updates than Azure Resource Manager (ARM) templates.
D. Azure Bicep can reduce deployment costs by limiting resource utilization during testing.
Answer: B
NEW QUESTION 12
You must add an Amazon Web Services (AWS) network access list (NACL) rule to allow SSH traffic to a subnet for temporary testing purposes. When you review the current inbound and outbound NACL rules, you notice that the rules with number 5 deny SSH and Telnet traffic to the subnet. What can you do to allow SSH traffic?
A. You do not have to create any NACL rules because the default security group rule automatically allows SSH traffic to the subnet.
B. You must create a new allow SSH rule anywhere in the network ACL rule base to allow SSH traffic.
C. You must create two new allow SSH rules, each with a number bigger than 5.
D. You must create two new allow SSH rules, each with a number smaller than 5.
Answer: D
NEW QUESTION 13
A network security administrator is searching for a solution to secure traffic going in and out of the container infrastructure. In which two ways can Fortinet container security help secure container infrastructures? (Choose two.)
A. FortiGate NGFW can inspect north-south container traffic with label-aware policies.
B. FortiGate NGFW and FortiWeb can be used to secure container traffic.
C. FortiGate NGFW can connect to the worker nodes and protect the containers.
D. FortiGate NGFW can be placed between each application container for north-south traffic inspection.
Answer: AB
NEW QUESTION 14
An organization is deploying FortiDevSec to enhance security for containerized applications, and they need to ensure containers are monitored for suspicious behavior at runtime. Which FortiDevSec feature is best for detecting runtime threats?
A. FortiDevSec Software Composition Analysis (SCA)
B. FortiDevSec Static Application Security Testing (SAST)
C. FortiDevSec Dynamic Application Security Testing (DAST)
D. FortiDevSec Container Scanner
Answer: D
NEW QUESTION 15
As part of your organizatio’s monitoring plan, you have been tasked with obtaining and analyzing detailed information about the traffic sourced at one of your FortiGate EC2 instances. What can you do to achieve this goal?
A. Use AWS CloudTrail to capture and then examine traffic from the EC2 instance.
B. Create a virtual public cloud (VPC) flow log at the network interface level for the EC2 instance.
C. Add the EC2 instance as a target in CloudWatch to collect its traffic logs.
D. Configure a network access analyzer scope with the EC2 instance as a match finding.
Answer: B
NEW QUESTION 16
You need a solution to safeguard public cloud-hosted web applications from the OWASP Top 10 vulnerabilities. The solution must support the same region in which your applications reside, with minimum traffic cost. Which solution meets the requirements?
A. Use FortiGate
B. Use FortiCNP
C. Use FortiWeb
D. Use FortiADC
Answer: C
NEW QUESTION 17
An administrator is relying on an Azure Bicep linter to find possible issues in Bicep files. Which problem can the administrator expect to find?
A. The resources to be deployed exceed the quota for a region.
B. Some resources are missing dependsOn statements.
C. There are output statements that contain passwords.
D. One or more modules are not using runtime values as parameters.
Answer: B
NEW QUESTION 18
You have deployed a FortiGate HA cluster in Azure using a Gateway Load Balancer for traffic inspection. However, traffic is not being routed correctly through the firewalls. What can be the cause of the issue?
A. The Fortinet VMs have IP forwarding disabled, which is required for traffic inspection.
B. The health probes for the Gateway Load Balancer are failing, which causes traffic to bypass the HA cluster.
C. The Gateway Load Balancer is not associated with the correct network security group (NSG) rules, which allow traffic to pass through.
D. The protected VMs are in a different Azure subscription, which prevents the Gateway Load Balancer from forwarding traffic.
Answer: B
NEW QUESTION 19
……
Learning the PassLeader FCSS_CDS_AR-7.6 dumps with VCE and PDF for 100% passing Fortinet certification — https://www.passleader.com/fcss-cds-ar-7-6.html (38 Q&As Dumps)
BONUS!!! Download part of PassLeader FCSS_CDS_AR-7.6 dumps for free — https://drive.google.com/drive/folders/1RUtXh2QEy7YNtJ2nx9FT1x0-nawtdAvn